Mike Chaney's Tech Corner
March 28, 2024, 09:03:34 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Qimage registration expired? New lifetime licenses are only $59.99!
 
   Home   Help Search Login Register  

Professional Photo Printing Software for Windows
Print with
Qimage and see what you've been missing!
Pages: [1]
  Print  
Author Topic: Perceptual or Relative colourmetric ?  (Read 12016 times)
mical
Newbie
*
Posts: 41


View Profile
« on: March 12, 2010, 10:59:12 AM »

Scanning very old b/w negs to RGB files for restoration and to add limited colours in PS(see attachment). When printed on  gloss paper, (Ilford smooth high gloss), all is good - i.e. neutral grays and accurate colour and very little metamerism.
However, printing on matte paper, metamerism is an issue when viewed under artificial lighting.
Question: any recommendations for a matte paper that is not prone to metamerism for this type of print output and regarding rendering intent would relative colourmetric be best?
My printer is on old Epson 2100. I am using pigment CIS system Photo black. All my profiles are created using PP and printed through QSE.
Many thanks
Alan
(added a copyright to pic)
« Last Edit: July 19, 2010, 05:59:56 PM by mical » Logged
Jeff
Hero Member
*****
Posts: 763



View Profile WWW Email
« Reply #1 on: March 12, 2010, 11:36:16 AM »

Where was that photo taken? looks like a 1947 ish at Torquay, I am sure I can remember subs being there about then.

Jeff

Logged

Grumpy
rayw
Sr. Member
****
Posts: 440


View Profile
« Reply #2 on: March 12, 2010, 03:04:04 PM »

Hi Alan,

Not quite sure of the cis system you are using, but possibly you are printing on matte paper with photo black ink. You probably need to use a matte black, which may reduce the geometric metameric failure. Also, if you are viewing the print under fluorescent lighting, it will tend to enhance the illuminant metameric failure.

wrt the rendering intent - try it and see is my best advice.

If it is critical to your work, then I would suggest you speak with specialist paper/ink suppliers. I could recommend fotospeed if you are in the UK. They have a good range of papers, and a practical knowledge of their products.  I am sure there are similar suppliers elsewhere.

Best wishes,
Ray
Logged
mical
Newbie
*
Posts: 41


View Profile
« Reply #3 on: March 16, 2010, 04:54:20 PM »

Where was that photo taken? looks like a 1947 ish at Torquay, I am sure I can remember subs being there about then.

Jeff


hi Jeff, my research suggests location is Devonport, Plymouth.  H29 sank there in 1926. The H class were single hull trainer boats designed towards the end of WW1 c1916. This photo was originally taken c1920.
Regards
Alan
Logged
mical
Newbie
*
Posts: 41


View Profile
« Reply #4 on: March 16, 2010, 05:07:17 PM »

Hi Alan,

Not quite sure of the cis system you are using, but possibly you are printing on matte paper with photo black ink. You probably need to use a matte black, which may reduce the geometric metameric failure. Also, if you are viewing the print under fluorescent lighting, it will tend to enhance the illuminant metameric failure.

wrt the rendering intent - try it and see is my best advice.

If it is critical to your work, then I would suggest you speak with specialist paper/ink suppliers. I could recommend fotospeed if you are in the UK. They have a good range of papers, and a practical knowledge of their products.  I am sure there are similar suppliers elsewhere.

Best wishes,
Ray


Hi Ray,Thanks for your imput, I will check out Fotospeed.
Regards
Alan
Logged
Seth
Sr. Member
****
Posts: 322



View Profile
« Reply #5 on: March 31, 2010, 11:16:50 AM »

I agree.  Sounds like the wrong black ink.  I have never heard of metamerism on matte paper.

The color shift in incandescent light would be normal though.  You have to run your test prints under the same light as the final print will be viewed in.  Silver photographicprints suffered the same issue.
Logged

Seth
<CWO4 (FMF) USN, Ret.>
willym
Newbie
*
Posts: 7



View Profile WWW
« Reply #6 on: May 01, 2010, 04:05:11 PM »

Hi Alan-

What are you using to scan the negs?
Regarding the conversion, for B&W it should make very little difference- the intent (RC or Perc.) determines how the converter handles out of gamut colors, which I doubt you have here. That said, sometimes you'll see a difference, usually the Perc. is somewhat lighter in the mid-tones and highlights.

However, sometimes you'll also see a difference where with perc. you lose some of the darkest shadows- obviously a problem printing on matte papers!
See my new post about weirdness of Photoshop conversions versus converting in Qimage- suffice it to say that Qimage is different, and better. I am still trying to puzzle this one out!

Feel free to call if you want to discuss this further.

Regards,

Bill Morse
William Morse Editions
MorseEditions.com

Scanning very old b/w negs to RGB files for restoration and to add limited colours in PS(see attachment). When printed on  gloss paper, (Ilford smooth high gloss), all is good - i.e. neutral grays and accurate colour and very little metamerism.
However, printing on matte paper, metamerism is an issue when viewed under artificial lighting.
Question: any recommendations for a matte paper that is not prone to metamerism for this type of print output and regarding rendering intent would relative colourmetric be best?
My printer is on old Epson 2100. I am using pigment CIS system Photo black. All my profiles are created using PP and printed through QSE.
Many thanks
Alan

Logged

Regards,

Bill Morse
Wm. Morse Editions
MorseEditions.com
mical
Newbie
*
Posts: 41


View Profile
« Reply #7 on: July 20, 2010, 08:35:21 AM »

Hi Bill, apologies for not replying until now, illness reared its ugly head.
The hardware I use is an Epson Perfection flatbed 3200 scanner,old but ok for me.
The software is Silverfast AI Studio. Using the 'multiscan 2 or 4 passes' does a really good scan.
Thanks for the pointers you raised.
Regards
Alan

Hi Alan-

What are you using to scan the negs?
Regarding the conversion, for B&W it should make very little difference- the intent (RC or Perc.) determines how the converter handles out of gamut colors, which I doubt you have here. That said, sometimes you'll see a difference, usually the Perc. is somewhat lighter in the mid-tones and highlights.

However, sometimes you'll also see a difference where with perc. you lose some of the darkest shadows- obviously a problem printing on matte papers!
See my new post about weirdness of Photoshop conversions versus converting in Qimage- suffice it to say that Qimage is different, and better. I am still trying to puzzle this one out!

Feel free to call if you want to discuss this further.

Regards,

Bill Morse
William Morse Editions
MorseEditions.com

Scanning very old b/w negs to RGB files for restoration and to add limited colours in PS(see attachment). When printed on  gloss paper, (Ilford smooth high gloss), all is good - i.e. neutral grays and accurate colour and very little metamerism.
However, printing on matte paper, metamerism is an issue when viewed under artificial lighting.
Question: any recommendations for a matte paper that is not prone to metamerism for this type of print output and regarding rendering intent would relative colourmetric be best?
My printer is on old Epson 2100. I am using pigment CIS system Photo black. All my profiles are created using PP and printed through QSE.
Many thanks
Alan

[/quote]
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Security updates 2022 by ddisoftware, Inc.