I have just built a new computer, with a new operating system (Windows , and am using a new monitor (Asus PA248Q), and a new camera (RX100). I would like to be sure with this new software, hardware, and reinstall of existing software that my color management system is intact. Here is where I am at:

Camera - Set for sRGB

Monitor - With hardware setup buttons have selected sRGB

AMD Vision - Display software left at default, 6500 K temp.

Windows 8 - Is confusing as there are bunches of settings under advanced color management. However the default display seems to be IEC 61966-2.1 which I believe is standard sRGB.

Photoshop Elements 11 - Color Settings - "Always Optimize Colors for Computer Screens"

Qimage Pro (Used for printing) - Monitor ICC - IEC 61966-2.1, Printer ICC - Let Printer Driver Manage Color

Printer (HP Photosmart Pro B8350) - Typically use HP Premium Plus setting

I'm thinking this will give me sRGB color space all the way through the process until it gets to the printer driver. Correct? Or have I missed something?

Hi again Ron,
I have been told that IEC 61966-2.1 is sRGB 
Another point, with using Let Printer driver manage colour you should set  the Driver to ICM. The Help says:
"While this mode of operation will ensure good color even with the "ICM" checkbox unchecked in the driver, it is best to select the "ICM" option in your print driver if that option is available.  Also, if your driver offers settings under the ICM heading, be sure to select "Applied by Printer Software" or its equivalent (do not select "no color adjustment")."
Terry

Choose "Let Printer Driver manage Colour". However you do need to set the printer driver as it says in the Help to get best results.
Are you uncertain about setting the driver?
Terry

Ron,
OK. when you click that icon, the window that opens allows you to select the printer (if you have more than one), and the paper size. There's a "properties" button which gives access to the driver where you, I assume, are selecting the paper type, glossy, matte etc. There will be other options in the driver to enable setting quality and ICM; unfortunately I cannot obtain any screen shots of the driver so cannot give any more assistance on this feature 
I have looked at the manual but that has no illustrations and does not seem mention any colour management settings.
However, the Qimage Help does say using ICM is optional so see how you get on without it.
Terry

Thanks for all the checking Terry. I looked at my HP ColorSmart Pro B8350 Properties. My color is selected to be ColorSmart/sRGB. The other choice which is not selected is Application Managed Color. Under Advanced there is no place  to select ICM. Perhaps that is a feature of more advanced printers than the one I have...