Mike Chaney's Tech Corner

Mike's Software => Profile Prism => Topic started by: Betty on March 18, 2010, 12:27:40 AM



Title: trying again.
Post by: Betty on March 18, 2010, 12:27:40 AM
Betty


Title: Re: trying again.
Post by: rayw on March 18, 2010, 02:31:29 AM
Hi Betty,

I do not have the latest version of profile prism, but in my earlier version, the bottom red alignment corners are set to the bottom corners of the white to black patches, not as you have shown in your screen shot - Most folk seem to make the mistake that you have made  :)

Best wishes,

Ray


Title: Re: trying again.
Post by: rayw on March 18, 2010, 02:43:50 AM
You can check, since the white rectangles should be situated in the centre of each colour patch, so in your case, it is sampling more than one patch, or in your screen shot the bottom row of patches is sampling part of a border, so it will be thinking the colours are greyer than they should be here.*

Another thing, I don't think it was mentioned, but you need to set the correct paper type when you print the test chart, to match the paper type you will be using, and of course use that paper type setting when you make your prints. You will sort it out, but it is a fair bit to think about if it is all new to you. The documentation I had with pp explains the detail quite well, but you need to read it and understand it.

Set the corners right, and watch those crosses vanish  :D

Best wishes,

Ray

* what is actually happening, is that in the part you have shown, it is expecting, at the left hand white rectangle the sample area for the white part of the white to black strip, but since you have in fact set the wrong location for the bottom corners, the scan area is compressed, and the sample patches will not line up with the correct colour patch in many cases. It shows it is sampling the border colour - a grey, when it expects white from the white to black strip. The next one over is sampling a bit of border and a colour, not a near white, and so on . You will probably find that some of the bottom row may not have crosses in the middle region, but just re scan the test chart and printed test again, with the correct corners selected, and get your money back on vuescan...


Title: Re: trying again.
Post by: Betty on March 18, 2010, 01:12:13 PM
Oh my goodness, Ray.  Could resolving this be that easy (maybe)?  Have I just put the markers in the wrong places?  I cannot wait to try again tonight.
You have so brightened my day!!

Many thanks,
Betty


Title: Re: trying again.
Post by: Fred A on March 18, 2010, 10:26:32 PM
Quote
Have I just put the markers in the wrong places?  I cannot wait to try again tonight.
You have so brightened my day!!
Sorry, but I was in the hospital all day, but you are in good hands.  Ray is right on the money!
Angle brackets in the wrong place.
Fred


Title: Re: trying again.
Post by: Betty on March 24, 2010, 04:32:20 PM
Hi Fred,
Hope you are ok!!  Sorry to hear you were in the hospital.  Please take good care of yourself!
Selfishly, I'll be picking back up trying to use PP soon, and I hope you are in great shape!  Life has pulled me in other directions this past week, but I'll be back trying again soon.

Betty.


Title: Re: trying again.
Post by: rayw on May 03, 2010, 07:10:49 PM
Hi Betty,

How are you getting on with PP, had chance to sort it out?

Best wishes,

Ray


Title: Re: trying again.
Post by: Betty on May 24, 2010, 04:50:30 PM
Hi Ray,
Just saw your post.  Sorry for the delay
I had to abandon my PP efforts as I had dog shows to photograph.  I'm still working on all the roads that takes me on as I do digital paintings also.  But, I WILL return to PP when the decks clear again.  And no doubt I'll have more questions.

Thanks for the check in!
Betty