Mike Chaney's Tech Corner
December 30, 2024, 05:10:37 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Qimage registration expired? New lifetime licenses are only $59.99!
 
   Home   Help Login Register  
Mike Chaney's Tech Corner > Mike's Software > Qimage Ultimate > Is there a Template for Printing Panoramas with R1900 Please?
Pages: [1]
« previous next »
  Print  
Author Topic: Is there a Template for Printing Panoramas with R1900 Please?  (Read 10939 times)
russellsnr
Jr. Member
**
Posts: 86
« on: June 21, 2016, 01:25:15 PM »
Hi, I do not print a great deal even though I have Qimage, found it easier for setting up to print single images than Lightroom. Anyways is there a template available to print a panorama on an Epson Photo R1900? I only have the one roll of Epson paper (8.3" x 32.8') to try printing panoramas and don't to be honest want to stumble along and waste paper as I go.
Once I get the hang of it as I understand it I can increase the paper up to 13".
Thankyou for any and all advive.
Russ
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #1 on: June 21, 2016, 06:02:46 PM »
Quote
Hi, I do not print a great deal even though I have Qimage, found it easier for setting up to print single images than Lightroom. Anyways is there a template available to print a panorama on an Epson Photo R1900? I only have the one roll of Epson paper (8.3" x 32.8') to try printing panoramas and don't to be honest want to stumble along and waste paper as I go.
Once I get the hang of it as I understand it I can increase the paper up to 13".
Thankyou for any and all advive.
Russ

Russ,
Since most panos have a unique size based on the number of pixels in the horizontal and the vertical, a template (which you can make yourself if you insist on it) is not the way to go.
Set you page dimensions to User Defined Roll paper banner mode at 8.4" x however large you wish... Let's set for 30" for this example.
Now in Qimage Ultimate open CUSTOM in  the print property box.
Second selection says Speify One dimension.. The one dimension that is for sure is teh width of the roll. So type in 8.1 and a dot in "THIS IS THE SHORT SIDE"
Now put your pano image in the queue, and you can have it fill the page by turning on auto cropping, or allow it to be as large as it can be with no cropping. That depends on what is in the image and whether you mind cropping off some sky or some foreground in order to fill the 30"
One snap shows crop off. The other crop on... see a few clouds missing in crop on
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #2 on: June 21, 2016, 06:08:12 PM »
I forgot to mention that you can customize the crop in the Page Editor
Pull it down if you want all the clouds, or up if you want the foreground and fill your print sheet
Fred
Logged
russellsnr
Jr. Member
**
Posts: 86
« Reply #3 on: June 21, 2016, 07:05:44 PM »
Hi, Many thanks for your help.
Russ
Logged
russellsnr
Jr. Member
**
Posts: 86
« Reply #4 on: June 26, 2016, 07:56:57 AM »
Quote from: Fred A on June 21, 2016, 06:02:46 PM
Quote
Hi, I do not print a great deal even though I have Qimage, found it easier for setting up to print single images than Lightroom. Anyways is there a template available to print a panorama on an Epson Photo R1900? I only have the one roll of Epson paper (8.3" x 32.8') to try printing panoramas and don't to be honest want to stumble along and waste paper as I go.
Once I get the hang of it as I understand it I can increase the paper up to 13".
Thankyou for any and all advive.
Russ

Russ,
Since most panos have a unique size based on the number of pixels in the horizontal and the vertical, a template (which you can make yourself if you insist on it) is not the way to go.
Set you page dimensions to User Defined Roll paper banner mode at 8.4" x however large you wish... Let's set for 30" for this example.
Now in Qimage Ultimate open CUSTOM in  the print property box.
Second selection says Speify One dimension.. The one dimension that is for sure is teh width of the roll. So type in 8.1 and a dot in "THIS IS THE SHORT SIDE"
Now put your pano image in the queue, and you can have it fill the page by turning on auto cropping, or allow it to be as large as it can be with no cropping. That depends on what is in the image and whether you mind cropping off some sky or some foreground in order to fill the 30"
One snap shows crop off. The other crop on... see a few clouds missing in crop on

Hi, Sorry still struggling with this.
My printer R1900.
Paper for testing, Epson 100mm (approx 4") x 10mtr.
I tried to follow this part under user defined in the printer driver setup 'Set your page dimensions to User Defined Roll paper banner mode at 8.4' but the printer/system tells me that to put the dot (.) ie 3.5 is not an acceptable character so if I just put in 4   it changes to 800  when I tap or use the Tab key to go into the Height box and yes I have the Unit box set for inches. (I maybe a Brit but I am still an old one and can work Feet and Inches faster than the stupid metric system)
I did try to print an image on the paper via Qimage and I followed what I no are the correct instructions to do it (video on youtube) but all I got was an image approx 1" wide not 3.5 X 24" long.
If I keep going with guess work I'll have a bin full of wasted photo paper so thank you for anymore advice that may come forward.
Russ
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #5 on: June 26, 2016, 09:22:21 AM »
Let me download the 1900 driver and install. I was using an R 2000 driver to work with the issue.
Maybe the 1900 does not use a (dot) and 8.3 inches would be 830
Give me a few minutes.
Fred
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #6 on: June 26, 2016, 09:41:20 AM »
Quote
https://drive.google.com/open?id=0B53uuILrcQ92NVNZaC1GWUJfMVE

OK I set uping teh R 1900 driver.
That driver does not use a dot.. so the entry would be 830  by 3000

It works every time perfectly
See snaps.
I also found the EURO driver. I will try that if it will run here

Fred
Logged
russellsnr
Jr. Member
**
Posts: 86
« Reply #7 on: June 26, 2016, 09:52:15 AM »
Hi thank you for ALL the help here.
So as my paper is 4" in the user define box width = 400?
What puts me off is on that page of user define at the bottom under units Epson use the (.)
Thanks again
Russ
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #8 on: June 26, 2016, 09:58:12 AM »
Quote
Hi thank you for ALL the help here.
So as my paper is 4" in the user define box width = 400?
What puts me off is on that page of user define at the bottom under units Epson use the (.)
Thanks again
Russ

Russ it is confusing, but I think they are trying to say... the inches are in (.01) hundredths, so 830 would be 8.30 inches

So are you all OK Now?

Fred
Logged
russellsnr
Jr. Member
**
Posts: 86
« Reply #9 on: June 26, 2016, 11:27:36 AM »
Quote from: Fred A on June 26, 2016, 09:58:12 AM
Quote
Hi thank you for ALL the help here.
So as my paper is 4" in the user define box width = 400?
What puts me off is on that page of user define at the bottom under units Epson use the (.)
Thanks again
Russ

Russ it is confusing, but I think they are trying to say... the inches are in (.01) hundredths, so 830 would be 8.30 inches

So are you all OK Now?

Fred
Hi, Sorry just been out for eats as it is after 2pm here but will try again and come back on results ASAP.
Thanks
Russ
Logged
russellsnr
Jr. Member
**
Posts: 86
« Reply #10 on: June 26, 2016, 12:30:03 PM »
Hi, well tried it all and after one box of paper came to this.
Got to be doing something wrong but cannot see it.
Tried putting in 400x800, 800x400, 4x8, 8x4.
Ticked the crop box as if I don't it asks if I want the image in two parts.
Thanks but for me just not working.
Russ.
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #11 on: June 26, 2016, 12:36:34 PM »
Quote
Ticked the crop box as if I don't it asks if I want the image in two parts.
Thanks but for me just not working.

When Qimage asks if you want your printin two parts, it is telling you that the print size you are asking for is larger than the paper size you selected.

Russ,
Here's my email address.  wathree.ssz@verizon.net
Send me an email, and I will make a video and send that to you.
You can follow it better.
What was your print size?

Fred
« Last Edit: June 26, 2016, 01:16:11 PM by Fred A » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Security updates 2022 by ddisoftware, Inc.