Mike Chaney's Tech Corner

Mike's Software => Qimage Ultimate => Topic started by: davidjp on January 20, 2011, 02:50:47 AM



Title: Multiple image printing
Post by: davidjp on January 20, 2011, 02:50:47 AM
Have Ultimate and using Epson R2400.  With 13" X 19" sheet paper, how do I get two 8" X 10" (same image) to print on same sheet?  Thanks in advance.  Tips/advice/whatever appreciated.

Dave


Title: Re: Multiple image printing
Post by: Fred A on January 20, 2011, 10:12:30 AM
Quote
Have Ultimate and using Epson R2400.  With 13" X 19" sheet paper, how do I get two 8" X 10" (same image) to print on same sheet?  Thanks in advance.  Tips/advice/whatever appreciated.

Dave

Hi Dave
Tell the Epson driver that you are using 13 x 19 paper.
After that, open the Print Properties box in Qimage Ultimate, and click the 8 x 10 size.
Then put 2 copies of the image into the queue. Placement should be set to Optimal Spaced or centered to match the screen snap.
Welcome to the forum!

Fred


Title: Re: Multiple image printing
Post by: Terry-M on January 20, 2011, 10:29:15 AM
Hi David,
One other tip, make sure the Print Orientation lock is off, it's the little padlock icon under the page preview.
If it's on and, for example, you had a landscape 13x19  page set with a 8x10 landscape image, 2 prints would not fit in that mode, the prints must be allowed to be rotated on the page by QU for them to fit.
Hope that  is clear!
Terry


Title: Re: Multiple image printing
Post by: davidjp on January 22, 2011, 06:14:11 PM
Thanks Fred and Terry.  Just getting use to working with Ultimate and sometimes initial basic help is required at this end.

Dave