I have three Epson R800 printers. One of these normally prints slightly lighter than the other two printers --(for the entire image).
I am in process of printing many of my images for Photo Albums with some having one 8x10 on a page, others with two 5x7, and the remaining having 9 per page. All are printed using 8 1/2 x 11 Photo paper.
I need to be able to include a - (Brightness minus factor of approximately -5) for brightness for ALL image file added to the Queue when recalling and using ANY of 3 Printer Setup files -- without having to select images in the Queue and entering the -5 Brightness setting.
Hopefully, there is a way to include this setting in the Printer Setup "saved" file for selection and usage.
I am aware of selecting one image, entering the -5, and apply to ALL images in the Queue, however; this also adds the setting to the image files and would require re-setting the files back to normal to NOT have the assignment.
Any suggestions will be appreciated.
Regards,
Vernon....
Hi Vernon,
Yes, Easy Peasy as Terry would say.
Using your example of -5 brightness, just open any image in the Image Editor.
Set the Brightness to -5 and anything else you need.
Click FILE, Save Parameters to a file.
Name the file. I named it MINUS FIVE
Now clear the queue and do not save the minus 5 setting to the image.
Place a checkmark on the main screen in the box labelled P flt
Select the minus 5 filter you created.
as long as the check is in the box, all the prints will have -5 brightness applied.
Fred
Qimage registration expired? New lifetime licenses are only $59.99!
