Mike Chaney's Tech Corner
November 14, 2024, 10:54:01 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Qimage registration expired? New lifetime licenses are only $59.99!
 
   Home   Help Login Register  
Mike Chaney's Tech Corner > Mike's Software > Qimage Ultimate > spooler sub system!!
Pages: [1]
« previous next »
  Print  
Author Topic: spooler sub system!!  (Read 9247 times)
hongu123
Newbie
*
Posts: 28
« on: April 11, 2012, 07:44:50 PM »
Hi guys just had this problem where QI sends to the printer, the printer prints nothing but 'pretends' it is the I get this message (see screen shot)
Never had this before been using QI for a while now and I thought I was getting the hang of it. I am assuming its to do with the way its been spooled to the printer
at the moment I have set to send as one page would changing this help? Also it is quiet a large file.
Thanks in advance
Phill
Logged
admin
Administrator
Forum Superhero
*****
Posts: 4218



Email
« Reply #1 on: April 11, 2012, 08:19:04 PM »
Go to "Edit", "Preferences", "Printing Options" and try both EMF and RAW for the spool mode.  See if one works better than the other for you.  Also, it is possible that you have a new driver and it is not compatible with settings from the previous driver that was used when printer settings were saved by Qimage.  To correct this, you must recreate the driver settings from scratch.  Click "Help", 'Reset printer settings" and when you restart Qimage, set the driver settings manually (without recalling a printer setup or job).  Once you recreate the settings, you can save them for future use.  The problems occur when you load an old printer setup or job that has settings based on an old (and now incompatible) driver.

Mike
Logged
hongu123
Newbie
*
Posts: 28
« Reply #2 on: April 12, 2012, 08:10:43 PM »
Hi Mike thanks for that I have set to RAW spool mode seems to work better. I did reinstall the printer driver too I am using a epson 9600 on windows 7 there is not a specific driver for win & but the xp one works fine (ish). anyway after reinstalling the driver and setting to raw then chose the required profile for the paper and printed the printer went through it motions but didn't print anything! I know I have used this profile before I get the feeling its a printer driver problem. Is anyone else using this printer with windows 7? maybe they could help me. All was going smoothly until I put a fresh install of windows 7 on this machine(silly me)
anyway will keep playing around and see if I can find what 'I' am doing wrong as this is most likely problem.

Phill
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #3 on: April 14, 2012, 10:21:43 AM »
Quote
Hi Mike thanks for that I have set to RAW spool mode seems to work better.

Phil,
Just want to point out something in emphasis to what Mike said about switching to RAW.
The Raw or EMF settings are part of the saved printer setup, so if you manually change from EMF to RAW, you should resave that set up.
Even if you reset printer settings and start from scratch with paper type, quality, No Color Adjustment, size etc, also set the Spooler to RAW in Qimage before you save the new Printer setup.

Fred
Logged
hongu123
Newbie
*
Posts: 28
« Reply #4 on: April 14, 2012, 10:35:53 AM »
Thanks for that Fred I din't know that. Well all seems ok now not really sure what happened all i have done is switch to raw and reinstalled the driver
seems to have done the trick Grin
Thanks for the advice and help its VERY much appreciated.
Phill 
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Security updates 2022 by ddisoftware, Inc.