Mike Chaney's Tech Corner
December 28, 2024, 10:00:29 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Qimage registration expired? New lifetime licenses are only $59.99!
 
   Home   Help Login Register  
Mike Chaney's Tech Corner > Mike's Software > Qimage Ultimate > Spacing of multiple images on one sheet...
Pages: [1]
« previous next »
  Print  
Author Topic: Spacing of multiple images on one sheet...  (Read 6180 times)
clinchfield
Newbie
*
Posts: 30


Email
« on: December 08, 2018, 04:24:31 PM »
I'm printing three 4x6 images on one 8.5 x 11 sheet. (Canon PRO-1000)

Under the Prints tab, I've chosen 4.00 x 6.00.

Under the Printers and Settings tab > Media size, I've chosen Letter 8.5 x 11.

How do I get at least a little spacing between the two parallel images to make trimming easier? When I print the page with the three images, there is still 1/4" at the paper edges so is there a way to nudge one or both images a little to create space between them?

I have tried all the print placement options but I don't see any choice that does what I want.
« Last Edit: December 08, 2018, 04:26:05 PM by clinchfield » Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #1 on: December 08, 2018, 08:23:23 PM »
Quote
How do I get at least a little spacing between the two parallel images to make trimming easier? When I print the page with the three images, there is still 1/4" at the paper edges so is there a way to nudge one or both images a little to create space between them?

I have tried all the print placement options but I don't see any choice that does what I want.
There is no way to move the image as the printable area is 8.0 and 4x6 against a 4 x 6 = 8.0 inches.

BUT the easiest way to do it, would be to apply a small border, either in color for design, or in white to be invisible. Either way, you get your spacing to cut.
Fred
See Screen snaps.
Logged
JustGeorge
Jr. Member
**
Posts: 93
« Reply #2 on: December 09, 2018, 06:00:58 AM »
I haven't actually tested this by making a print my PRO-100, but visually in QU it looks like if I turn on Borderless printing in the driver, I get a small white space around all of the prints, and the prints don't seem to be bleeding off any edges.  Using IntelliSpace (a couple of other spacing options also seem to work).  This may not work with any other printer.  And of course there may be other problems with this option that I'm not seeing.  When I get a chance I 'll test this theory.

--George
Logged
~I'm not a photographer, but I play one in real life.~
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #3 on: December 09, 2018, 06:59:33 AM »
Quote
I haven't actually tested this by making a print my PRO-100, but visually in QU it looks like if I turn on Borderless printing in the driver, I get a small white space around all of the prints, and the prints don't seem to be bleeding off any edges.  Using IntelliSpace (a couple of other spacing options also seem to work).  This may not work with any other printer.  And of course there may be other problems with this option that I'm not seeing.  When I get a chance I 'll test this theory.

Hi George,
Your idea seems to work fine.  The expansion does chop off a little, but unnoticeable unless I am looking for it.
Fred
Logged
clinchfield
Newbie
*
Posts: 30


Email
« Reply #4 on: December 24, 2018, 04:49:45 PM »
Quote
There is no way to move the image as the printable area is 8.0 and 4x6 against a 4 x 6 = 8.0 inches.

I didn't realize the printable area was limited to 8.0. If that's true, how are borderless prints made? (I have no intention of printing borderless - I'm just wondering)

Quote
BUT the easiest way to do it, would be to apply a small border, either in color for design, or in white to be invisible. Either way, you get your spacing to cut.
See Screen snaps.

Thank you, Fred - I'll note that.

Quote
in QU it looks like if I turn on Borderless printing in the driver, I get a small white space around all of the prints

Thank you, George
Logged
clinchfield
Newbie
*
Posts: 30


Email
« Reply #5 on: January 10, 2019, 07:48:40 PM »
Quote
There is no way to move the image as the printable area is 8.0 and 4x6 against a 4 x 6 = 8.0 inches.
BUT the easiest way to do it, would be to apply a small border, either in color for design, or in white to be invisible.

OK on the border idea, thanks. Why is the printable area 8.0 on an 8.5 paper? Isn't there a way to configure QU to have less than a 1/4" border?
Logged
Fred A
Forum Superhero
*****
Posts: 5644



WWW Email
« Reply #6 on: January 10, 2019, 08:34:26 PM »
Quote
Why is the printable area 8.0 on an 8.5 paper? Isn't there a way to configure QU to have less than a 1/4" border?
The reason is because Canon designed it that way. See screen snap od Epson R2000. You can see the printable is 10.766 x 8.266 inches.
Qimage does not control that.
Fred
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Security updates 2022 by ddisoftware, Inc.