Fred and Ernst
I do all my color profile, but the problem are on two Z3200, one in my house (special tuned z3200) and other z3200 HP original in studio, both has the same problem using different profiles, different paper, different sizes, different connection and different archive but not on every archive.
Don´t do the problem on all archive, I test same different problematic image in Jpeg and tiff, 8 and 16 bits, 150, 200 or 400 ppis. and the problem are the same.
All time I print same image, JPG or Tiff dark rectangles are in the same position, if I rotate image or change margins square go to different position and images with same dimension do different dark rectangular position.
Every time I use output resolution on Qimage off, let driver handles, all images are 200ppis or 300ppis
Today I print 30 images 40cmX61cm Rag paper at Z3200 and 4 prints 112cmX165cm on Rag Baryta on Z3100 at same time using 129 and all perfect, at finish reinstall 135 to test z3200 and odd problem do on first print beginning.
I use Win7 – 64
Z3200 and Z3100 are Photo not PS
Thank you
Alberto dy
With v2014-135 installed on Vista 64 bit and the settings like you mentioned I do not see anything odd. Two trials with print quality settings asking for 300 or 600PPI input, different images. A Z3200PS (A model) but through the PCL3 driver. Not the latest firmware and driver though. I could install Qimage Ultimate on a W7 system here but I have only one license and it may corrupt the Vista installation which I prefer to use right now.
Is there anything odd visible in the Z3200 driver print preview?
To nail the problem down, if I send you v2014.134 to try, would that be a good idea?
--
Met vriendelijke groet, Ernst
http://www.pigment-print.com/spectralplots/spectrumviz_1.htmJanuary 2014, 600+ inkjet media white spectral plots.